Screen colours may vary. Contact our team for information about MAT SILK PVC.
MAT SILK PVC
MAT SILK PVC
- Reference
- MAT SILK PVC
- Collection
- Glass
- Thickness
- 80 μm
- Width
- 152.459 cm
- Length
- 50 m
- Warranty
- 5 years
Technical data
MAT SILK PVC in detail
- Sub-family
- PVC
- Width
- 152.459 cm
- Length
- 50 m
- Thickness
- 80 μm
- Composition
- PVC
- Warranty
- 5 years
- Storage temperature
- 5°C-30°C
- Storage
- 3 years
- Fire rating (EN 13501-1)
- M1 (NF P92-507)
- Installation area
- Interior
- Installation temperature
- 12°C-38°C
- Installation method
- Wet
Maintenance
Use Slide On (600-FO2) or Film On (600-F0355), diluted at 6 mL/L of water, for routine cleaning. Clean the film with a soft, non-abrasive cloth or sponge. Do not clean the film during the first month following installation, and do not apply stickers, labels, tape or other adhesives to the film. Avoid abrasive products, scouring pads and sharp objects that could damage the surface.
Installation guidance
- Before installation, thoroughly clean and degrease the glazing, removing all dust, grease and residues. - Pre-cut the film to the required dimensions, then wet the glass and the adhesive side of the film with an application solution prepared using Slide On (600-FO2) or Film On (600-F0355), diluted at 6 mL /L of water. - Position the film carefully and remove the application liquid and air with a suitable felt squeegee (500-038), working from the centre towards the edges. - Trim any excess film neatly and allow the film to dry naturally. Small water bubbles or slight haze may remain during the drying period and will gradually disappear as the adhesive cures.
Non-contractual visuals and data. Cover Styl reserves the right to change the composition of its films at any time.
Related Glass finishes
