Screen colours may vary. Contact our team for information about PF-K5.
PF-K5
PVC Free - Anchor
- Reference
- PF-K5
- Collection
- Colour
- Thickness
- 220 μm
- Width
- 122 cm
- Length
- 50 m
- Warranty
- 5 years
Applied in real spaces · Click a photo to enlarge
Technical data
PF-K5 in detail
- Sub-family
- Essential
- Surface effect
- Matt
- Width
- 122 cm
- Length
- 50 m
- Thickness
- 220 μm
- Weight
- 195 g/m²
- Composition
- PP
- Adhesive
- Acrylic PSA with air release system
- Warranty
- 5 years
- Storage temperature
- 5°C-30°C
- Storage
- 2 years
- Pattern direction
- Not Visible
- Scratch resistance
- Average
- Fire rating (EN 13501-1)
- B-s1,d0
- Stretchable
- Not Suitable
- Installation area
- Interior
- Installation temperature
- 12°C-38°C
- Installation method
- Dry
- Durability
- 10 years
Durability
10 years
Maintenance
For daily care, use a mild soap or pH-neutral detergent to clean the film’s surface. Avoid using products with extremely acidic or basic pH levels, as they can harm the material. When cleaning the film surface, only use soft cloths or sponges to prevent any damage. For stubborn stains, apply hot water (not boiling) to the affected area. If necessary, use a cleaning solution composed of 70% isopropyl alcohol and 30% water, applied with a melamine sponge. For sanitizing, use only isopropyl alcohol-based products like Isopropyl Alcohol Wipes (not for daily use). Avoid organic-based cleaners like ammonia or polish, as they can damage vinyl. Test any cleaning detergents, bactericides, or virucidal products on a hidden area first to ensure compatibility.
Installation guidance
- PVC Free film features a high-tack adhesive. No primer is normally required on hard, properly prepared surfaces. Primer PRO may be required in overlap areas to ensure proper adhesion. - The film is thinner than standard PVC films, making careful substrate preparation particularly important. Surface imperfections or colour variations may remain visible after installation. - Due to the adhesive construction, adhesive residue may remain on the substrate during removal. For temporary applications, consider applying the product over a removable/low-cost film to reduce the risk of adhesive residue on the substrate. - When wrapping edges / arris, heat the film and maintain a consistent temperature during the folding process to improve flexibility and reduce the risk of air channels along the edges. - Do not overstretch or expose the film to excessive heat during or after installation, as this may cause cracking. - Important: Always test the material and adhesion on the intended substrate before installation and follow the standard Cover Styl’ Installation Guidelines for surface preparation and application procedures.
Non-contractual visuals and data. Cover Styl reserves the right to change the composition of its films at any time.
Related Colour finishes
